Programming a New Key Fob for a 2015 Ford Escape

Step 1: Gather Your Tools

• Two existing, working key fobs (if you only have one, you may need to visit a dealership or a professional automotive locksmith, as special tools may be required).
• The new unprogrammed key fob.
• Your 2015 Ford Escape.

Step 2: Enter the Programming Mode

• Sit in the driver's seat and close all the doors securely.
• Insert the first working key into the ignition and turn it to the "On" position (do not start the engine).
• Turn the key to the "Off" position and remove it from the ignition.
• Within 10 seconds, insert the second working key into the ignition and turn it to the "On" position.
• Turn the key to the "Off" position and remove it from the ignition.
• Within 8 seconds of removing the second key, insert the new unprogrammed key into the ignition and turn it to the "On" position.

Step 3: Finalize the Programming

• Leave the new key in the "On" position for at least 6 seconds until the security light on the dashboard turns off. This indicates that the new key has been successfully programmed.
• Turn the key to the "Off" position and remove it from the ignition.

Step 4: Test the New Key Fob

• Test the new key fob by using it to start the engine and operate the door locks.
• If the key fob does not work, repeat the steps above or consult your owner's manual for further instructions.

Additional Tips

• Keep all key fobs away from each other during the programming process to prevent signal interference.
• If you have trouble programming your new key fob, contact your local Ford dealership or a certified locksmith for assistance.