How can a new key fob be programmed for a 2015 Nissan Rogue?

 
Step 1: Gather Necessary Materials
 

• A new key fob compatible with a 2015 Nissan Rogue
• Existing key fob (if available)
• Your 2015 Nissan Rogue vehicle

• Get into your Nissan Rogue and close all the doors. The programming sequence will not work properly if the doors are open.

• Insert the key into the ignition without turning it. Then, remove the key. Repeat this process at least six times, but no more than ten times, in a span of ten seconds. You should see the hazard lights flash twice, indicating that the vehicle is in programming mode.

• Insert the key into the ignition and turn it to the "ACC" position.

• Press any button on the new key fob. The hazard lights should flash again to indicate the successful programming of the new key fob.
• If you have additional key fobs to program, press any button on those key fobs as well within the next 10 seconds.

• Once all fobs are programmed, turn the ignition to the off position and remove the key.
• Exit the vehicle and close all doors.
• Test each key fob to ensure they can lock and unlock the doors and start the engine.

Step 7: Troubleshooting
 

• If the new key fob does not work, repeat the steps above carefully. Make sure you complete each step within the specified time frame.
• If the issue persists, consult your Nissan dealer as some models may require professional programming.