How can you program a new key fob for a 2015 Toyota RAV4?

 
1. Gather Necessary Materials:
 

• A new key fob programmed for a 2015 Toyota RAV4.
• Existing master key (if available).
• Access to the vehicle.

• Ensure all doors are closed and unlocked.
• Insert the key into the ignition but do not turn it.

• Insert and remove the key from the ignition twice within five seconds.
• Close and open the driver’s door twice within 40 seconds.
• Insert and remove the key from the ignition again.
• Close and open the driver's door twice within 40 seconds.
• Insert the key into the ignition and leave it without turning it.

• Turn the ignition to the "ON" position (without starting the engine), then turn it back to "OFF."
• Remove the key from the ignition.
• The door locks will cycle (lock and unlock) to confirm the vehicle is in programming mode.
• On the new key fob, press both the lock and unlock buttons simultaneously for about 1.5 seconds.
• Immediately press the lock button for about 2 seconds. The door locks should cycle to confirm successful programming. If they do not, repeat steps from "Program the New Key Fob" again.

• Open the driver's door to exit programming mode.
• Test the new key fob to ensure it is working correctly (locking and unlocking the vehicle).

• To program additional key fobs, repeat the steps from "Program the New Key Fob" for each fob within 40 seconds of the previous fob's programming.

• Test all programmed key fobs to ensure they are working properly.