How do you replace the cabin air filter on a 2017 Honda CR-V?

Step 1: Gather necessary tools
 

• Replacement cabin air filter
• Phillips screwdriver (if required)
• Flashlight (if needed)

Step 2: Locate the glove box
 
The cabin air filter in a 2017 Honda CR-V is located behind the glove box. Sit in the passenger seat and open the glove box to access it.

Step 3: Empty the glove box
 
Remove all items from the glove box to ensure they do not fall out or get damaged during the process.

Step 4: Disconnect the damper arm
 
On the right-hand side of the glove box, you will find a small damper arm attached. Gently push the arm and detach it from the glove box. This will allow the glove box to open fully.

Step 5: Remove glove box stops
 
Push in on both sides of the glove box to release the stops. You might need to apply some pressure to disengage the stops properly. This will make the glove box drop down, giving you clear access to the cabin air filter housing.

Step 6: Locate cabin air filter housing cover
 
Once the glove box is lowered, look behind it to find the cabin air filter housing. It is usually a rectangular black cover with tabs on both sides.

Step 7: Remove the cabin air filter cover
 
Pinch the tabs on either side of the filter cover and pull it out towards you. Set the cover aside.

Step 8: Remove the old cabin air filter
 
Slide the old cabin air filter out of the housing. Pay attention to the direction of the airflow arrows indicated on the filter, as you will need to install the new filter in the same direction.

Step 9: Install the new cabin air filter
 
Take your new cabin air filter and ensure the airflow arrows are pointing in the correct direction. Insert the new filter into the housing, making sure it fits snugly.

Step 10: Replace the cabin air filter cover
 
Reattach the cabin air filter cover by lining up the tabs and snapping it back into place.

Step 11: Reattach the glove box stops
 
Lift the glove box back into its original closed position and push the sides in to re-engage the stops.

Step 12: Reconnect the damper arm
 
Reconnect the damper arm to the side of the glove box.

Step 13: Close the glove box
 
Close the glove box and ensure it is securely latched. Return all items you had removed during the process.

Step 14: Test the new filter
 
Turn on your vehicle and switch on the air conditioning or heater to ensure proper airflow through the new cabin air filter.

Congratulations! You have successfully replaced the cabin air filter on your 2017 Honda CR-V.