How do you replace the engine air filter on a 2017 Ford Escape?

Gather Necessary Tools and Materials

• New engine air filter
• Flathead screwdriver
• Microfiber cloth or rag

Locate the Air Filter Housing

• Open the hood of your 2017 Ford Escape and secure it with the prop rod.
• The air filter housing is typically a rectangular or square black plastic box located near the top of the engine compartment, usually on the driver's side.

Remove the Housing Cover

• Unclip the metal retaining clips or use a flathead screwdriver to loosen the screws or clamps holding the cover of the air filter housing in place.
• Carefully lift or slide the cover off and set it aside.

Remove the Old Air Filter

• Take note of how the current air filter is seated within the housing.
• Gently pull out the old air filter and dispose of it properly.

Clean the Air Filter Housing

• Use a microfiber cloth or rag to wipe out any dirt or debris inside the air filter housing. Ensure it is clean before installing the new filter.

Install the New Air Filter

• Insert the new air filter into the housing, making sure it is seated correctly and oriented the same way the old filter was.

Replace the Housing Cover

• Put the housing cover back in place and secure it with the clips, screws, or clamps that were removed earlier.

Close the Hood

• Ensure everything is secure, then close the hood of your vehicle.

Final Inspection

• Start the engine and let it run for a couple of minutes to make sure everything is functioning correctly.