How do you update the NissanConnect infotainment system software on a 2019 Nissan Rogue?

 
Step 1: Check for Updates
 

• Before you begin, check to see if there’s a new software update available for your 2019 Nissan Rogue’s NissanConnect infotainment system. You can do this by visiting the official Nissan website or consulting your vehicle’s owner’s manual for details.

• You will need a USB drive with at least 4GB of free space. Make sure the USB drive is formatted to FAT32, as this is the format that is compatible with the NissanConnect system.
• Ensure your vehicle is parked in a safe, well-ventilated area, ideally with a stable WiFi connection if needed.

• Visit the Nissan owner's portal on the official Nissan website. You may need to create an account or log in to an existing one.
• From the portal, navigate to the section where software updates are available and choose the appropriate update for the 2019 Nissan Rogue.
• Download the software update file to your computer. Once the download is complete, transfer the file to your USB drive.

• Turn the ignition to the “ON” position, but do not start the engine. This will power up the infotainment system.
• Ensure all other functions in your vehicle, such as Bluetooth and audio, are turned off to prevent any interruptions during the update process.

• Insert the USB drive containing the software update into one of the USB ports in your Nissan Rogue.

• The NissanConnect infotainment system should automatically detect the update file on the USB drive. A prompt will appear on the screen asking if you want to update the software.
• Follow the on-screen instructions to begin the update process. This may take several minutes, so be patient and avoid turning off the vehicle or removing the USB drive during this time.

• Once the update is complete, the system will notify you. At this point, you can remove the USB drive.
• Restart your vehicle’s infotainment system to ensure the update has been successfully applied.
• Check the system settings to verify that the software version matches the latest update you installed.

• Restore any settings or preferences that may have been reset during the update process.
• Re-enable any functions you turned off previously, such as Bluetooth and audio.
• Take a few minutes to test the system and ensure all features are functioning correctly.