If you are fortunate enough to own or work on a 1967 Shelby GT500, you may find yourself needing to open the hood. This can sometimes be confusing if you are not familiar with classic muscle cars, as the hood release mechanisms are different from modern vehicles. Whether you're performing routine maintenance or simply showing the engine to a friend, here is how to solve this issue.

Step 1: Locate the Exterior Hood Latch

The first step in opening the hood of a 1967 Shelby GT500 is to find the exterior hood latch. Stand at the front of the car and look under the edge of the hood, in the center. You will see a lever that you can pull. This lever is usually flat, made of metal, and may have some resistance. Pull the lever outward; this will release the primary catch of the hood.

Step 2: Access the Secondary Latch

Once you have pulled the exterior hood latch, the hood will pop up slightly but will still be secured by a secondary latch for safety reasons. Move to the front of the vehicle and gently lift the hood to about six inches. Look underneath the center of the hood to locate the secondary latch. This is a small, spring-loaded metal hook that sits slightly to the left or right under the hood's edge.

Step 3: Release the Secondary Latch

Using one hand to keep the hood slightly elevated, use your other hand to push the secondary latch to the side. This action will fully release the hood, allowing it to open completely. You may hear a click as the latch disengages. At this point, you can lift the hood up fully and secure it with the prop rod if necessary. The prop rod is typically located either on the side of the engine bay or attached to the underside of the hood itself, often tucked into a small clip.

Step 4: Secure the Hood for Work

Before you start working on the car, make sure the hood is securely propped open to prevent it from accidentally closing. Position the prop rod, which is a metal rod about a foot long, into the retaining hole or slot typically marked for this purpose on the edge of the engine bay. This will keep the hood safely open while you work.

Conclusion

Opening the hood on a 1967 Shelby GT500 involves finding and manipulating both the exterior and interior hood latches. Taking these careful steps will ensure you can access the engine bay without damaging the car or injuring yourself. Happy motoring!