Opening the hood of a classic car like the 1968 Ford Mustang GT Fastback can be a bit tricky, especially if you're used to modern vehicles. Lack of familiarity with the release mechanism and the absence of more contemporary features might make this seem like a daunting task. If you're unsure where to start, don't worry; here is how to solve this issue:

Step 1: Locate the Hood Release

The hood release for the 1968 Ford Mustang GT Fastback is not inside the cabin like in modern cars. You'll find the primary hood latch mechanism at the front grille area. Stand in front of the car and locate the Mustang emblem on the grille. The latch is directly behind this emblem.

Step 2: Release the Exterior Latch

Place your fingers under the front edge of the hood, just above the grille. Feel for a metal lever or latch. This might be slightly off-center, closer to the driver’s side. The release lever is a small metal tab that you need to push either upward or sideways. Once you find and manipulate this lever, you’ll hear a click, indicating that the primary latch has been released.

Step 3: Lift the Hood Slightly

After the main latch is disengaged, lift the hood slightly. You should now see the secondary latch mechanism. This secondary latch is designed to prevent the hood from flying open if the primary latch fails.

Step 4: Locate and Release the Secondary Latch

While holding the hood slightly open with one hand, use the other hand to locate the secondary latch. This latch is typically a small metal hook or lever situated at the center underneath the hood. Push this latch upwards or to the side to fully release the hood.

Step 5: Fully Open the Hood

Once the secondary latch is released, you can lift the hood completely. Some models may have a prop rod to hold the hood open, located on the right side (facing the car) of the engine bay. If your Mustang has this, lift the prop rod and place it into the designated hole on the underside of the hood to keep it secure.

Final Tips

• Visual Clues: The hood latches are often rusted or painted over, so they may not be immediately visible. Use a flashlight if necessary.

• Practice Caution: When lifting the hood, ensure you have a firm grip as the older hinge mechanisms may be less smooth than modern ones.

By following these steps, you should be able to easily open the hood of your 1968 Ford Mustang GT Fastback and gain access to the engine bay for any maintenance or inspection needs.