Operating the manual windows in a 1969 Pontiac GTO Judge can seem confusing if you're accustomed to modern vehicles with electric windows. It's important to understand the manual mechanism to efficiently and safely open and close your windows. Here is how to solve this issue:

Step 1: Locate the Window Crank Handle

First, you need to identify the window crank handle. Seated inside your classic Pontiac GTO Judge, look at the lower section of the interior door panel. You'll notice a small, round handle with a short lever protruding from the door — this is the window crank handle.

Step 2: Grasp the Crank Handle Properly

Before you start turning the handle, ensure you have a firm grip. Place your fingers around the crank handle and your thumb over the end of the lever to provide support and control. This ensures that you can smoothly operate the mechanism without your hand slipping off.

Step 3: Rotate the Crank Handle

To roll the window down, rotate the crank handle in a clockwise direction. Continue turning the handle until the window reaches your desired position. Keep in mind, if the window is all the way up, it will take several rotations to lower it completely.

Step 4: Raising the Window

If you need to roll the window back up, rotate the crank handle counterclockwise. As you turn, observe the window lifting back into place. Ensure you are turning the handle steadily to avoid jerking motions which can cause the mechanism to age prematurely.

Step 5: Troubleshooting

If you encounter any resistance or hear unusual noises while operating the window, it may indicate a potential problem with the crank mechanism or the window track. In such cases, check for any visible obstructions or consult a professional mechanic for further inspection.

By following these steps, you can efficiently use the manual windows in your 1969 Pontiac GTO Judge, retaining that classic car experience.