How to resolve brake squeal in a 2014 Chevrolet Corvette Stingray during low-speed braking?

Inspect the Brake Pads and Rotors

• Remove the wheels to access the brake components.
• Check the brake pads for uneven wear, glazing, or contamination with dirt or oil.
• Inspect the rotors for grooving, scoring, or warping. Resurface or replace if necessary.

Clean the Brake Components

• Use a brake cleaner spray to remove any dirt, debris, or grease from the brake pads and rotors.
• Ensure that the caliper slides and pins are clean and well-lubricated to allow proper movement.

Apply Anti-Squeal Compound

• Apply an anti-squeal compound or brake pad grease to the back of the brake pads where they contact the caliper pistons or the caliper bracket.
• This helps to dampen vibrations that lead to squealing noises.

Replace Brake Pads if Necessary

• If the brake pads are excessively worn, glazed, or contaminated, it’s best to replace them with new, high-quality pads.
• Consider ceramic brake pads, which are known for being quieter and producing less dust compared to metallic pads.

Check Brake Shims and Hardware

• Ensure that the brake shims and other hardware are in good condition and properly positioned.
• Replace any worn-out or missing shims to help prevent brake noise.

Bed-in the New Pads and Rotors

• If you’ve installed new pads or rotors, follow the manufacturer’s procedure to bed them in correctly.
• This typically involves a series of controlled stops from moderate speeds to help transfer an even layer of brake pad material onto the rotor surface.