How to update the Uconnect infotainment system on a 2019 Ram 1500?

Check for Updates

• First, you'll need to determine if there is an update available for your Uconnect system. Visit the official Uconnect website and navigate to the software update section.

Prepare a USB Drive

• Obtain a USB drive with at least 4GB of storage, and make sure it is formatted to FAT32.
• Download the update file from the Uconnect website and transfer it to the USB drive.

Start the Update Process in Your Vehicle

• Turn on your 2019 Ram 1500's ignition but do not start the engine.
• Insert the USB drive into the USB port in your vehicle.
• The Uconnect system should automatically detect the update file on the USB drive.

Follow On-Screen Prompts

• Once the update is detected, the infotainment system will display a prompt asking if you want to start the update process.
• Select "Yes" to start the update. The system will then begin copying files from the USB drive.

Wait for the Update to Complete

• The entire update process can take anywhere from 20 to 45 minutes. Do not turn off the ignition or remove the USB drive during this time.
• Follow any additional on-screen instructions if prompted.

Reboot the System

• Once the update is complete, the system will automatically reboot.
• Verify that the update was successful by confirming the new software version on the Uconnect system info page.

Remove the USB Drive

• After the update and reboot are finished, safely remove the USB drive from the USB port.

Test the System

• Ensure all functions of the Uconnect system are working properly, including navigation, climate control, and any other features specific to your model.